Business Networking For Tilers, Tiling Contractors, Tiling Tools and Tiling News

What DRY tile cutter do you use?

What DRY tile cutter do you use? At present I've got three, but use only two.

Rubi TS50 Plus (Doesn't get used, I find the fixed breaker too limiting)

Sigma Technica 36cm - Absolutely great little machine, nicely designed, light and cuts ceramics and porcelain easily.

Tomecanic Supercoup 75cm - A beast of a machine, massive amount of breaking power, twin breakers.

Wouldn't mind a Sigma Diagonale to try, Sigma are you listening??

So what do you guys use and what do you think of them?

▶ Reply to This

Replies to This Discussion

Permalink Reply by C.M.D Ceramics on July 22, 2008 at 5:31pm: what about rubi's tx series?? Theyre great with porceline !

wall and floor tiling contractor in London. Kitchen / bathrooms.; ▶ Reply to This

Permalink Reply by Dave Carr on August 20, 2008 at 3:15pm: Never used the Tx range but they've always looked the biz. I often find a smaller wheel makes for a neater cut especially on textured stuff. My little Sigma cuts beautifully :); ▶ Reply to This

Permalink Reply by Gall.b on December 8, 2008 at 4:46am: Sigma! have 5 of them. rubi sometimes, bought a Felker & Husquarva recently from YTC both crap; ▶ Reply to This

Permalink Reply by Protilers on February 3, 2009 at 5:19pm: My everyday drycutter id a Rubi ts60+ and i think its a great all rounder...i know what you mean about the breaker, does not allways break straight on large format tiles.....i get around this by just scribing and breaking it off old fashion style with a small rip under the scoreline and snap with my foot!!!!!!; ▶ Reply to This

Permalink Reply by Nottingham Tiling on March 31, 2009 at 11:34pm: Hi Dave,
long time no speak i use a shitty ts60 very old and shit i know ! btw im looking at purchasing a tomechanic do you reccomend this (i presume so) and do you have that tomechanic for sale still?

cheers rich; ▶ Reply to This

Permalink Reply by Nottingham Tiling on April 5, 2009 at 9:27pm: Hi Dave,

thinking very much of purchasing the tomechanic.

Q 1. what tile size will it cut up to?
Q 2. how old is the machine and the wheel cutter?; ▶ Reply to This

Permalink Reply by neil widdison on January 21, 2010 at 9:39am: i use my old ts 50 all the time ,but struggles on hard tiles, have a tiny montolit for splash back great little cutter looks like a toy,also a montolit masterpriuna 54 also a great cutter specialy on diagonal cutters, and a rubi tx 700 n for larger tiles, .; ▶ Reply to This